CLI Guide

Omconfig Connector Commands
The following table displays the omconfig command syntax required to execute connector tasks.
Table 216. omconfig Connector Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
connector
action=rescan controller=id connector=id
Omconfig Rescan Connector
Table 217. Omconfig Rescan Connector
Description Rescans a controller connector. This command rescans all connectors on the controller and is
therefore similar to performing a controller rescan.
NOTE: This command is not supported on SAS controllers.
Syntax omconfig storage connector action=rescan controller=id connector=id,
where id is the controller ID and the connector ID as reported by the omreport command.
To obtain these values, type omreport storage controller to display the controller IDs
and then type omreport storage connector controller=ID to display the IDs for the
connectors attached to the controller.
Example to Rescan connector 2 on controller 1.
Example
omconfig storage connector action=rescan controller=1 connector=2
Omconfig cachecade commands
The following table displays the omconfig command syntax required to execute cachecade tasks.
Table 218. omconfig Cachecade Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id [force=yes]
action=resize controller=id cachecade=id pdisk= <PDISKID>
action=rename controller=id cachecade=id name=<string>
Omconfig Blink Cachecade
Table 219. Omconfig Blink Cachecade
Description Blinks the physical disks included in a cachecade.
184 Omconfig storage commands