CLI Guide

Table 210. Omconfig Global Commands (continued)
Required Command
Levels (1, 2, 3)
Optional name=value pairs
action=setprotectionpolicies type=ghs or dhs
action=setremainingratedwriteendurancethreshold type=sassata | pcie threshold=<1-100>
Omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a critical temperature
of 0 or 50 degree Celsius. However, if you have implemented connector redundancy on the PV220S and PV221S enclosures
you can specify that only the enclosure and not the operating system and server are shut down when the enclosure reaches a
critical temperature of 0 or 50 degree Celsius. Specifying that only the enclosure is shut down during excessive temperatures
is known as Smart Thermal Shutdown. For more information about Smart Thermal Shutdown, see the Dell EMC OpenManage
Online Help.
Table 211. Omconfig Global Enable Smart Thermal Shutdown
Description Enables smart thermal shutdown.
Syntax
omconfig storage globalinfo action=enablests
Example to Enable thermal shutdown. The omconfig command syntax for enabling thermal shutdown does
not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine
whether smart thermal shutdown is currently enabled or disabled. The status of smart thermal
shutdown is also displayed by the Server Administrator graphical user interface (GUI). To
locate this status, select the Storage object and the Information/Configuration tab.
Example
omconfig storage globalinfo action=enablests
Omconfig Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omconfig command, you can disable smart thermal shutdown
and return the system to its default setting. When smart thermal shutdown is disabled, the operating system and the server
shuts down when the PV220S and PV221S enclosures reach a critical temperature of 0 or 50 degree Celsius.
Table 212. Omconfig Global Disable Smart Thermal Shutdown
Description Disables smart thermal shutdown for all controllers.
Syntax
omconfig storage globalinfo action=disablests
Example to Disable thermal shutdown. The omconfig command syntax for disabling thermal shutdown does
not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to determine
whether smart thermal shutdown is currently enabled or disabled. The status of smart thermal
shutdown is also displayed in the GUI of Server Administrator. To locate this status, select the
Storage object and the Information/Configuration tab.
Example
omconfig storage globalinfo action=disablests
182 Omconfig storage commands