CLI Guide

Table 7. Command Level 1, Level 2, And Level 3 For omreport (continued)
Command Level 1 CommandLevel 2 Command Level 3 User Privilege
Required
Use
settings, such as
the Power button
and/or Nonmasking
Interrupt (NMI)
button (if present
on the system), are
enabled or disabled.
It also displays the
front panel encryption
access information and
the front panel LCD
information.
fru U, P, A Displays the Field
Replaceable Unit (FRU)
information.
hwperformance U, P, A Displays the status
and cause for the
system’s performance
degradation.
info U, P, A Displays a status
summary for main
system chassis
components.
intrusion U, P, A Displays the status of
the system’s intrusion
sensor(s).
leds U, P, A Displays the properties
you have set for light-
emitting diodes to flash
under various alert
conditions.
memory U, P, A Displays properties of
the system's memory
arrays.
nics U, P, A Displays the NIC
and Team interface
properties.
ports U, P, A Displays the properties
for the system’s parallel
and serial ports, such
as I/O address, IRQ
level, connector type,
and maximum speed.
processors U, P, A Displays properties
of the system’s
processors, including
speed, manufacturer,
and processor family.
pwrmanagement U, P, A Displays power
inventory details
such as system
idle power, system
maximum potential
18 omreport Viewing System Status Using The Instrumentation Service