CLI Guide

Omconfig Import Foreign Configuration
Table 183. Omconfig Import Foreign Configuration
Description Imports all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importforeignconfig controller=id, where id is
the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.0.x.
Example to Import foreign configurations on controller 1.
Example
omconfig storage controller action= importforeignconfig controller=1
Omconfig Import Or Recover Foreign Configuration
Table 184. Omconfig Import Or Recover Foreign Configuration
Description Imports and recovers all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importrecoverforeignconfig controller=id,
where id is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported on firmware version 5.1.1 and later.
Example to Import foreign configurations on controller 1.
Example
omconfig storage controller action= importrecoverforeignconfig controller=1
Omconfig Clear Foreign Configuration
Table 185. Omconfig Clear Foreign Configuration
Description Clears or deletes all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= clearforeignconfig controller=id, where id is
the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in firmware version 5.0.x.
Example to Clear foreign configurations on controller 1.
Example
omconfig storage controller action= clearforeignconfig controller=1
Omconfig physical disk power management
Table 186. Omconfig physical disk power management
Description Manages the power of physical disks in a controller by spinning down hot spares, configured drives, and
unconfigured drives.
Syntax
omconfig storage controller action= setpdiskpwrmanagement
spindownunconfigureddrives= <enabled | disabled> spindownhotspares=<enabled
| disabled> spindownconfigureddrives=<enabled | disabled>
idlec=<enabled | disabled> spindowntimeinterval=<30 to 1440>(minutes)
Omconfig storage commands 173