CLI Guide

Table 154. Omconfig Enable Controller Alarm (continued)
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Enable the alarm on controller 1.
Example
omconfig storage controller action=enablealarm controller=1
Omconfig Disable Controller Alarm
Table 155. Omconfig Disable Controller Alarm
Description Disables the controller alarm. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Disable the alarm on controller 1.
Example
omconfig storage controller action=disablealarm controller=1
Omconfig Quiet Controller Alarm
Table 156. omconfig Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell EMC OpenManage
Online Help.
Syntax omconfig storage controller action=quietalarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
omconfig Test Controller Alarm
Table 157. omconfig Test Controller Alarm
Description Tests the functionality of the controller alarm. The alarm sounds for about two seconds. For more
information, see Dell EMC OpenManage Online Help.
Syntax omconfig storage controller action=testalarm controller=id , where id is
the controller ID as reported by the omreport storage controller command.
Example to Test the alarm on controller 1.
Example
omconfig storage controller action=testalarm controller=1
Omconfig Reset Controller Configuration
Table 158. Omconfig Reset Controller Configuration
Description Resets the controller configuration.
162 Omconfig storage commands