CLI Guide

NOTE: If the PERC hardware controller is running in HBA mode, you can perform only one action, exporting the log
(action=exportlog).
Table 152. omconfig Controller Commands
Required Command Levels (1,
2, 3)
Optional name=value pairs
omconfig storage controller action=rescan controller=id
action=enablealarm controller=id
action=disablealarm controller=id
action=quietalarm controller=id
action=testalarm controller=id
action=resetconfig controller=id [force=yes]
action=createvdisk controller=id raid=<c | r0 | r1| r1c | r5 | r6 | r10 | r50 | r60>
size=<number | b | m | g | max | min> pdisk=<PDISKID> [stripesize=< 2kb | 4kb |
8kb | 16kb | 32kb | 64kb | 128kb | 256kb | 512kb | 1mb >] [cachepolicy=<d | c>]
[readpolicy=<ra | nra | ara | rc | nrc>] [writepolicy=<wb | wt | wc | nwc | fwb>]
[diskcachepolicy=<default | disabled | enabled>] [name=<string>] [spanlength=<n>] |
[secureflag=yes] [vdpienabled=yes]
NOTE: For RAID 10 on SAS controllers with firmware version 6.1 and later, spanlength
is an optional parameter (default=2).
action=setrebuildrate controller=id rate=<0 to 100>
action=setchangecontrollerproperties
controller=<id> [bgirate=<rate>][reconstructrate=<rate>][checkconsistencyrate=<rate>]
[rebuildrate=<rate>][clearredundantpath=clear] [rate=<0 to
100>] [abortcheckconsistencyonerror=<enabled/disabled>][loadbalance=<auto/
disabled>][allowrevertiblehotspareandreplacemember=enabled/disabled]
[autoreplacememberonpredictivefailure=<enabled/disabled>] [persistenthotspare=enabled/
disabled][nrdiskcachepolicy=<enabled/disabled/unchanged>]
action=discardpreservedcache controller=id force=<enabled/disabled>
action=createsecuritykey controller=id keyid=<keyid> passphrase=<passphrase string>
[escrow=yes] [filepath=<Absolute path to the escrow file>]
NOTE: If you set escrow=yes, specify the escrow file path.
action=changesecuritykey controller=id keyid=<keyid> passphrase=<passphrase string>
oldpassphrase=<oldpassphrase string> [escrow=yes] [filepath=<Absolute path to the
escrow file>]
NOTE: If you set escrow=yes, specify the escrow file path.
action=deletesecuritykey controller=id
action=setbgirate controller=id rate=<0 to 100 >
action=setreconstructrate controller=id rate=<0 to 100>
action=setcheckconsistencyrate controller=id rate=<0 to 100>
action=exportlog controller=id
action=importsecureforeignconfig controller=id passphrase=<passphrase for imported
foreign configuration>
action=importforeignconfig controller=id
action=importrecoverforeignconfig controller=id
action=clearforeignconfig controller=id
160 Omconfig storage commands