CLI Guide

Table 132. Omconfig Manage Virtual Disk Commands (continued)
Required Command Levels
(1, 2, 3)
Optional name=value pairs
action=rename controller=id vdisk=id
action=enablefluidcache controller=id vdisk=id devicename=<string> cachepolicy=<wb | wt>
action=disablefluidcache controller=id vdisk=id devicename=<string>
action=reactivate controller=id vdisk=id devicename=<string>
Omconfig Check Consistency
Table 133. omconfig Check Consistency
Description
Initiates a check consistency on a virtual disk. The check consistency task verifies the virtual disk’s
redundant data.
Syntax omconfig storage vdisk action=checkconsistency controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks attached to the controller.
Example to Run a check consistency on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=checkconsistency controller=1 vdisk=4
Omconfig Pause Check Consistency
Table 134. omconfig Pause Check Consistency
Description
Pauses a check consistency while in progress. For more information, see the Dell EMC
OpenManage Online Help.
Syntax
omconfig storage vdisk action=pausecheckconsistency controller=id
vdisk=id , where id is the controller ID and virtual disk ID as reported by the omreport
command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Pause a check consistency on virtual disk 4 on controller 1
Example
omconfig storage vdisk action=pausecheckconsistency controller=1
vdisk=4
Omconfig cancel check consistency
Table 135. omconfig cancel check consistency
Description
Cancels a check consistency while in progress.
Syntax
omconfig storage vdisk action=cancelcheckconsistency
controller=id vdisk=id, where id is the controller ID and virtual disk ID as
reported by the omreport command.
152 Omconfig storage commands