CLI Guide

Omconfig Available Spare
Table 119. omconfig Available Spare
Description
Assigns a physical disk as a global hot spare.
Syntax
omconfig storage globalinfo
action=setavailablesparethreshold
type=<pcissd> warning_threshold=<1-99>,
critical_threshold=<1-99> where id is the controller ID. The
<pcissd> variable specifies the PCISSD.
NOTE: To obtain these values, type omreport
storage controller to display the controller
IDs and then type omreport storage pdisk
controller=ID to display the IDs for the physical disks
attached to the controller.
Example to Set available spare threshold on supported NVMe PCIe SSD.
Example for PCIe SSD
omconfig storage globalinfo
action=setavailablesparethreshold
type=pciessd warning_threshold=20
Omconfig Rebuild Physical Disk
Table 120. omconfig Rebuild Physical Disk
Description Rebuilds a failed physical disk. Rebuilding a disk may take
several hours. If you need to cancel the rebuild, use the
Cancel Rebuild task. For more information about Rebuild
Physical Disk, see the Dell EMC OpenManage Online Help.
Syntax
omconfig storage pdisk action=rebuild
controller=id pdisk=<PDISKID>, where id is the
controller ID. The <PDISKID> variable specifies the physical
disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller
IDs and then type omreport storage pdisk
controller=ID to display the IDs for the physical disks
attached to the controller.
Example to Rebuild physical disk 3 on connector 0 of controller 1. On a
SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=rebuild
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=rebuild
controller=1 pdisk=0:2:3
Omconfig storage commands 145