CLI Guide

Using The omhelp Command
The omhelp command and its equivalent, <command> -?, accesses the detailed help-text interface of Command Line
Interface (CLI). You can get help at several levels of detail.
Each fully-qualified CLI command may have a variable number of distinct parts: the command (command level 1), one or more
subcommands (command level 2 and command level 3, if present), and one or more name= value pair(s).
By appending -?(space-dash-question mark) to any command, you can get help for that command.
Topics:
• Example Help Commands
Example Help Commands
When you type omconfig -?, you get general help about the omconfig command. The help at this level lists the available
subcommands for omconfig:
● about
● preferences
● chassis
● system
When you type omconfig system -?, the CLI help lists all the subcommands available for omconfig system:
● alertaction
● alertlog
● assetinfo
● cmdlog
● esmlog
● events
● platformevents
● pedestinations
● recovery
● shutdown
● thrmshutdown
● webserver
Also parse the omconfig system assetinfo command as follows:
<command level 1 command level 2 command level 3> <name=value pair 1> [name=value pair 2]
where command levels 1, 2, and 3 are represented by omconfig system assetinfo, name=value pair 1 is represented by
info=depreciation , and name=value pair 2 is represented by method=straightline.
To set the depreciation method to straight line, type:
omconfig system assetinfo info=depreciation method=straightline
The CLI responds with the following message:
Asset information set successfully.
When you type omconfig system assetinfo -?, the help that displays provides information about assigning values for
the name and option fields. Partial results for the request omconfig system assetinfo -? are as follows:
assetinfo Set asset information.
2
14 Using The omhelp Command