CLI Guide

Table 83. Valid Parameters Of omconfig system assetinfo info=maintenance Or omconfig servermodule
assetinfo info=maintenance (continued)
Command
Level 1
Command Level
2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
startdate=<startdate> Date the maintenance
begins.
restrictions=<string> Activities not covered by
the maintenance contract.
Example command for adding maintenance information
To provide a value for a maintenance parameter, type a command of the form: omconfig system assetinfo
info=maintenance <name=value pair 2> or omconfig system assetinfo info=maintenance
<name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance startdate=012504
or
omconfig servermodule assetinfo info=maintenance startdate=012504
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the
same time, as long as all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see
Example Commands For Adding Acquisition Information.
Adding outsource information
Outsourcing is the practice of contracting with another business to maintain the system in good working order. The following
table displays the valid parameters for adding outsource information.
Table 84. Valid Parameters Of omconfig system assetinfo info=outsource Or omconfig servermodule
assetinfo info=outsource
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=outsource levels=<n> Levels of service that
the provider offers.
problemcomponent=<component> System component
that requires
maintenance.
providerfee=<providerfee> Amount of money
charged for
maintenance.
servicefee=<servicefee> Amount of money
charged for service.
signauth=<name> Person who signed or
authorized the service.
122 Omconfig System Or Servermodule Assetinfo Editing Cost Of Ownership Values