CLI Guide

You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the
same time, as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For example, to type
more than one parameter value for info=acquisition, use the following example as a syntax guide:
omconfig system assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John Smith"
expensed=yes costcenter=finance
or
omconfig servermodule assetinfo info=acquisition purchasecost=5000 waybill=123456
installdate=120501 purchasedate=050601 ponum=9999 signauth="John Smith" expensed=yes
costcenter=finance
The following message is displayed:
Asset information set successfully.
Adding depreciation information
Depreciation is a set of methods for computing the devaluation of the asset over time. For example, the depreciation
of a system that is expected to have a useful life of 5 years is 20 percent. Use the omconfig system assetinfo
info=depreciation or omconfig servermodule assetinfo info=depreciation command to add details about
how the system's depreciation is computed. The following table shows the valid parameters for the command.
Table 80. Valid Parameters Of omconfig system assetinfo info=depreciation or omconfig servermodule
assetinfo info=depreciation
Command Level
1
Command
Level 2
Command Level
3
Name= Value
Pair 1
Name= Value Pair
2
Description
omconfig system or
servermodule
assetinfo info=depreciation duration=<n> Number of years or
months over which a
system is depreciated.
method=<text> Steps and assumptions
used to compute the
system's depreciation.
percent=<n> Portion of 100 that an
asset is devalued or
depreciated.
unit=months | years Unit is months or years.
Example command for adding depreciation information
To provide a value for a depreciation parameter, type a command of the form: omconfig system assetinfo
info=depreciation <name=value pair 2> or omconfig servermodule assetinfo info=depreciation
<name=value pair 2>. For example, type:
omconfig system assetinfo info=depreciation method=straightline
or
omconfig servermodule assetinfo info=depreciation method=straightline
The following message is displayed:
Asset information set successfully.
Omconfig System Or Servermodule Assetinfo Editing Cost Of Ownership Values
119