Reference Guide

Table 2. Common Properties of Classes (continued)
Property Description Data Type
property can be overridden to be a Key
property.
Status Provides a string indicating the status of
the component. Status values include:
Operational Status Values:
● OK indicates that the object is
functioning normally.
● Degraded means that the item is
functioning, but not optimally.
● Stressed indicates that the element
is functioning, but needs attention.
Examples of Stressed states are
overloaded, overheated, and so on.
Nonoperational Status Values:
● Non-recover means that a
nonrecoverable error has occurred.
● Error means that an element has
encountered an operational condition
that is severe as compared to its
normal mode of operation.
string
SystemCreationClassName Indicates the system’s creation class
name.
string
UnitModifier Provides the unit multiplier for the values
returned by this sensor. All the values
returned by this sensor are represented
in units of 10 raised to the power of the
unit modifier. If the unit modifier is –6,
then the units of the values returned are
microvolts. The units apply to all numeric
properties of the sensor, unless explicitly
overridden by the units’ qualifier.
sint32
UpperThresholdCritical If the current reading is between upper
threshold critical and upper threshold
fatal, the current status is critical. See
Figure 3‑2.
sint32
UpperThresholdNonCritical If the current reading is between lower
threshold noncritical and lower threshold
critical, the current status is noncritical.
See Figure 3‑2.
sint32
Version Version should be in the
form <major>.<minor>.<revision> or
<major>.<minor><letter><revision>; for
example, 1.2.3 or 1.2a3.
string
Other Documents You May Need
Besides this Dell EMC OpenManage Server Administrator CIM Reference Guide, you can find the following documents on the
Dell Support website at dell.com/support/manuals:
Introduction
9