Reference Guide

Table 71. DELL NetworkPort Properties (continued)
Property Description Data Type
8 - NIC/driver supports querying
for capability but an error prevented
querying the NIC/driver.
16 - NIC/driver supports querying for
capability but NIC/driver did not respond
to query.
NOTE: Boolean value is defined
if RDMA is enabled (Boolean is
RDMAEnable).
NIC iSCSI Capability Defines the iSCSI capability of the NIC.
Values for the NIC iSCSI Capability
property are:
0 - NIC/driver does not support querying
for capability.
1 - NIC/driver supports querying for
capability but query returned an error.
2 - NIC/driver supports querying for
capability and querying indicates that it
is capable.
4 - NIC/driver supports querying for
capability and querying indicates that it
is not capable.
8 - NIC/driver supports querying
for capability but an error prevented
querying the NIC/driver.
16 - NIC/driver supports querying for
capability but NIC/driver did not respond
to query.
NOTE: Boolean value is defined
if iSCSI is enabled (Boolean is
iSCSIEnable).
uint 32
NIC Status Indicates the status of the NIC or driver.
The values for the NIC Status property
are:
0 - Unknown
1 - Connected
2 - Disconnected
3 - Driver is bad
4 - Driver is disabled
10 - Hardware is initializing
12 - Hardware is closing
13 - Hardware is not ready
uint 32
NParEPEnable Indicates the mode for NParEP.
The values for the NParEPEnable are:
0 - Disabled
1 - Enabled
uint 32
72 Dell-Defined Classes