Reference Guide

Table 71. DELL NetworkPort Properties (continued)
Property Description Data Type
Bit 0, Value 0 - Reporting NIC
capabilities through this attribute is not
supported.
Bit 0, Value 1 - Reporting NIC capabilities
through this attribute is supported.
Bit 1, Value 0 - NIC is not TOE capable.
Bit 1, Value 1 - NIC is TOE capable.
Bit 2, Value 0 - NIC is not iSOE capable.
Bit 2, Value 1 - NIC is iSOE capable.
Bit 3, Value 0 - NIC is not FCoE capable.
Bit 3, Value 1 - NIC is FCoE capable.
NIC TOE Capability Defines the TOE capability of the NIC.
Values for the NIC TOE Capability
property are:
0 - NIC/driver does not support querying
for capability.
1 - NIC/driver supports querying for
capability but query returned an error.
2 - NIC/driver supports querying for
capability and querying indicates that it
is capable.
4 - NIC/driver supports querying for
capability and querying indicates that it
is not capable.
8 - NIC/driver supports querying
for capability but an error prevented
querying the NIC/driver.
16 - NIC/driver supports querying for
capability but NIC/driver did not respond
to query.
NOTE: Boolean value is defined
if TOE is enabled (Boolean is
TOEEnable).
uint 32
NIC RDMA Capability Defines the RDMA capability of the NIC.
Values for the NIC RDMA Capability
property are:
0 - NIC/driver does not support querying
for capability.
1 - NIC/driver supports querying for
capability but query returned an error.
2 - NIC/driver supports querying for
capability and querying indicates that it
is capable.
4 - NIC/driver supports querying for
capability and querying indicates that it
is not capable.
uint 32
Dell-Defined Classes 71