Reference Guide

Table 37. CIM_PCIController Properties
Property Description Data Type
CommandRegister The current contents of the register that
provide basic control over the device’s
ability to respond to, and/or perform PCI
accesses. The data in the capabilities
array is gathered from the PCI status
register and the PCI capabilities list as
defined in the PCI specification.
Values for the CommandRegister
property are:
0 — Unknown
1 — Other
2 — Supports 66 MHz
3 — Supports user-definable features
4 — Supports fast back-to-back
transactions
5 — PCI-X capable
6 — PCI power management supported
7 — Message signaled interrupts
supported
8 — Parity error recovery capable
9 — AGP supported
10 — Vital product data supported
11 — Provides slot identification
12 — Hot swap supported
uint16
CIM_PCIDevice
The CIM_PCIDevice class shown in Table below describes the capabilities and management of a PCI device controller on an
adapter card.
The following table describes the properties and data type of the CIM PCI Device class.
Class Name: CIM_PCIDevice
Parent Class: CIM_PCIController
Table 38. CIM_PCIDevice Properties
Property Description Data Type
BaseAddress Identifies an array of up to six double-
word base memory addresses.
uint32
42 CIM_LogicalElement