Reference Guide
Table Of Contents
- Dell EMC OpenManage CIM Reference Guide Version 10.1.0.0
- Contents
- Introduction
- CIM_Physical Element
- CIM_LogicalElement
- CIM_LogicalElement
- CIM_System
- CIM_ComputerSystem
- DELL_System
- CIM_LogicalDevice
- CIM_FRU
- CIM_Sensor
- CIM_DiscreteSensor
- CIM_NumericSensor
- CIM_TemperatureSensor
- CIM_CurrentSensor
- CIM_VoltageSensor
- CIM_Tachometer
- CIM_WatchDog
- CIM_CoolingDevice
- CIM_Fan
- CIM_UserDevice
- CIM_PointingDevice
- CIM_Keyboard
- CIM_PowerSupply
- CIM_Controller
- CIM_ParallelController
- CIM_SerialController
- CIM_PCIController
- CIM_PCIDevice
- CIM_PCIBridge
- CIM_Processor
- CIM_StorageExtent
- CIM_Memory
- CIM_CacheMemory
- DELL_SoftwareFeature
- CIM_BIOSElement
- CIM_SoftwareFeature
- DELL_SoftwareFeature
- CIM_SystemResource
- CIM_IRQ
- CIM_MemoryMappedIO
- CIM_DMA
- CIM_RedundancyGroup
- CIM_ExtraCapacityGroup
- DELL_PSRedundancyGroup
- DELL_FanRedundancyGroup
- CIM_EnabledLogicalElement
- CIM_ServiceAccessPoint
- CIM_RemoteServiceAccessPoint
- DELL_RemoteServiceAccessPort
- Dell-Defined Classes
- DELL_PostLog
- DELL_CMApplication
- DELL_CMDevice
- DELL_CMDeviceApplication
- DELL_CMInventory
- DELL_CMOS
- DELL_CMProductInfo
- DELL_BIOSExtensions
- DELL_BIOSSettings
- DELL_SDCardDevice
- DELL_NetworkPort
- DELL_PowerConsumptionAmpsSensor
- DELL_PowerConsumptionWattsSensor
- DELL_PowerConsumptionData
- DCIM_OEM_DataAccessModule
- DCIM_RegisteredProfile
- CIM_Dependency
CIM_PhysicalConnector
The CIM_PhysicalConnector class listed in Physical Connector Properties includes physical elements such as plugs, jacks,
or buses that connect physical elements. Any object that can be used to connect and transmit signals or power between two or
more physical elements is a member of this class. For example, slots and D-shell connectors are types of physical connectors.
See Connector Type Values for a list of valid connector type values.
The following table describes the properties and data type of the CIM PhysicalConnector class.
Class Name: CIM_PhysicalConnector
Parent Class: CIM_PhysicalElement
Table 11. CIM_PhysicalConnector Properties
Property Description Data Type
ConnectorPinout A free-form string describing the pin
configuration and signal usage of a
physical connector.
string
ConnectorType An array of integers defining the
type of physical connector. An array
is specified to allow the description
of “combinations” of connector
information. For example, one array
entry could specify RS-232, another
DB-25, and a third entry could define
the connector as male. See Connector
Type Values for the values of the
ConnectorType property.
uint16
Table 12. Connector Type Values
Connector Type Values
0 - Unknown 30 - unused 60 - Micro-DIN 90 - On board IDE Connector
1 - Other 31 - unused 61 - PS/2 91 - On board floppy
2 - Male 32 - IEEE-48 62 - Infrared 92 - 9 Pin dual inline
3 - Female 33 - AUI 63 - unused 93 - 25 Pin dual inline
4- Shielded 34 - UTP Category 3 64 - Access bus 94 - 50 Pin dual inline
5 - Unshielded 35 - UTP Category 4 65 - unused 95 - 68 Pin dual inline
6 - SCSI (A) High-Density (50
pins)
36 - UTP Category 5 66 - Centronics 96 - On board sound
connector
7 - SCSI (A) Low-Density (50
pins)
37 - BNC 67 - Mini-Centronics 97 - Mini-jack
8 - SCSI (P) High-Density (68
pins)
38 - RJ11 68 - Mini-Centronics Type-14 98 - PCI-X
9 - SCSI SCA-I (80 pins) 39 - RJ45 69 - Mini-Centronics Type-20 99 - Sbus IEEE 1396-1993 32-
bit
10 - SCSI SCA-II (80 pins) 40 - Fiber MIC 70 - Mini-Centronics Type-26 100 - Sbus IEEE 1396-1993
64-bit
20 CIM_Physical Element