Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Table 1265. LRA Global State
Name
lRAGlobalState
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.2
Description Defines the state of the LRA global settings.
Syntax DellStateSettings
Access Read-only
Table 1266. LRA Global Settings Disable Time-out Value
Name
lRAGlobalSettingsDisableTimeoutValue
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.3
Description Defines the time-out duration countdown, in seconds, that the LRA global settings are
disabled after a system shutdown and reboot.
Syntax DellUnsigned32BitRange
Access Read-only
Table 1267. LRA Global Settings Capabilities Unique
Name
lRAGlobalSettingsCapabilitiesUnique
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.4
Description Defines the set of global capabilities that all local response agents may or may not allow
to be set or reset.
Syntax DellLocalResponseAgentCapabilitiesUnique (LRA Capabilities Definitions)
Access Read-only
Table 1268. LRA Global Thermal Shutdown Capabilities Unique
Name
lRAGlobalThermalShutdownCapabilitiesUnique
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.5
Description Defines the set of thermal shutdown capabilities that are supported by the LRA.
Syntax DellLRAThermalShutdownCapabilitiesUnique
Access Read-only
Table 1269. LRA Global Thermal Shutdown State Settings Unique
Name
lRAGlobalThermalShutdownStateSettingsUnique
Object ID 1.3.6.1.4.1.674.10892.1.1500.10.1.6
Description Defines the set of thermal shutdown state and settings that the local response agent
supports.
Syntax DellLRAThermalShutdownStateSettingsUnique
Access Read-only
LRA Action Table
The DellLocalResponseAgentCapabilitiesUnique variable in the global action table defines the capabilities that are
allowed for a particular system. The LRA Action Table that follows selects which of the system’s capabilities (global actions) are
to be enabled.
288
Server Administrator Group