Reference Guide

Table Of Contents
Table 1126. Physical Memory Logging Capabilities (continued)
If set to 0 (zero)
There are no logging capabilities.
unknown Capabilities(1)
Logging capabilities are unknown.
The logging capabilities are:
enableCapable(2)
Logging enable/disable using Simple Network Management
Protocol (SNMP) is supported.
Table 1127. Physical Memory Logging Settings
Variable Name: DellPhysicalMemoryLoggingSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no logging settings enabled. unknown
Capabilities(1)
Logging capabilities are unknown.
The logging settings are:
enabled(2)
Logging is disabled (0), or enabled (1).
BIOS Setup Control Group
Basic Input/Output System (BIOS) Setup Control Group variables provide information about the functions that the BIOS
performs in your system. This management information base (MIB) group includes variables for the boot sequence, speakers,
diskettes, ports, network interface controllers (NICs), and the Wakeup on local area network (LAN) feature.
BIOS Setup Control Group Tables
The MIB tables in this group define the BIOS control of devices and controller cards that are typically present in a system.
BIOS Setup Control Table
SCSI Control Table
Parallel Port Control Table
Serial Port Control Table
USB Control Table
IDE Control Table
Diskette Control Table
Network Interface Control Table
The following MIB table in the BIOS Setup Control Group is supported on Dell PowerEdge xx2x (12G) systems:
BIOS Setting Table
BIOS Setup Control Group Tables
Table 1128. BIOS Setup Control Table
Name
biosSetUpControlTable
Object ID 1.3.6.1.4.1.674.10892.1.1400.10
Description Defines the set of single devices in a chassis controlled by the BIOS.
Syntax BiosSetUpControlTableEntry
Access Not accessible
Table 1129. BIOS Setup Control Table Entry
Name
biosSetUpControlTableEntry
260 Server Administrator Group