Release Notes

Table 6. Known issues for Storage Management Service (continued)
Issue ID Functional area Description Workaround/Resolutions
Not available Import foreign
configuration task
is not successful
The Import Foreign Configuration task can only import
virtual disks that have consistent data. A virtual disk
with inconsistent data cannot be imported. When
importing multiple virtual disks in a single operation,
however, the Import Foreign Configuration task may
report successful completion even when inconsistent
virtual disks are present and have not been imported
successfully.
If the "Import Foreign
Configuration" task is unable
to import an inconsistent
virtual disk, then the physical
disks that belong to the
virtual disk continue to display
a "Foreign" state after the
"Import Foreign Configuration"
task completes. In this case,
repeat the "Import Foreign
Configuration" task until one of
the following occurs:
● There are no longer any
physical disks in Foreign
state after the Import
Foreign Configuration task
completes.
● You receive an error stating
that the Import Foreign
Configuration task has
not completed successfully.
This error indicates that
there are no longer any
consistent virtual disks
available to be imported.
Therefore, all virtual disks
that are not imported are
inconsistent and you can
either perform a "Clear
Foreign Configuration" to
remove the virtual disks or
remove the physical disks
from the controller.
DF60696
Internet Explorer
9.x or 10.x
Storage Management responds slowly when using
Internet Explorer 9.x or 10.x on a system with
mixed SAS and SATA physical disks. When using
the "Create Virtual Disk" wizard from the Storage
Management graphical user interface (GUI), you may
notice decreased performance when using Internet
Explorer 9.x or 10.x on a system with multiple
physical disks. The MD1000/MD1400/MD1420 storage
enclosures that are heavily populated with mixed SAS
and SATA physical disks.
Use a supported web
browser other than Internet
Explorer 9.x or 10.x or
use the Storage Management
command line interface (CLI)
to create the virtual disk. See
the Dell EMC OpenManage
Server Administrator Release
Notes for information on
supported browsers. See
the Storage Management
online Help or the "Server
Administrator Command Line
Interface User's Guide" for
information on using the
Storage Management CLI.
DF152362 Storage
Management may
not display
controllers
Storage Management may not recognize the controller
devices that are installed after Storage Management is
already running.
If Storage Management does
not recognize a newly-added
device and this problem has
not been corrected with a
Global Rescan, then reboot the
system.
DF120475 Storage
Management
SNMP traps
Server Administrator allows you to filter SNMP traps
that you do not want to receive. To implement
SNMP trap filtering, select the System tree > Alert
SNMP trap filtering will be
provided in a future release of
Storage Management.
18