Reference Guide

Table Of Contents
Description Line
Item
Memory device location: <Device name in chassis>
Explanation Specifies the location of the memory module in the chassis, for example: Memory device location:
DIMM_A
Description Line
Item
Number of devices required for full redundancy: <Number>
Explanation Specifies the number of power supply or cooling devices required to achieve full redundancy, for example:
Number of devices required for full redundancy: 4
Description Line
Item
Peak value (in Watts):<Reading>
Explanation Specifies the peak value in Watts, for example: Peak value (in Watts): 1.693
Description Line
Item
Possible memory module event cause: <list of causes>
Explanation Specifies a list of possible causes for the memory module event, for example: Possible memory
module event cause:
Single bit warning error rate exceeded
Single bit error logging disabled
Description Line
Item
Power Supply type: <type of power supply>
Explanation Specifies the type of power supply, for example: Power Supply type: VRM
Description Line
Item
Previous redundancy state was: <State>
Explanation Specifies the status of the previous redundancy message, for example: Previous redundancy
state was: Lost
Description Line
Item
Previous state was:<State>
Explanation Specifies the previous state of the sensor, for example: Previous state was: OK (Normal)
Description Line
Item
Processor sensor status: <status>
Explanation Specifies the status of the processor sensor, for example: Processor sensor status:
Configuration error
Description Line
Item
Redundancy unit: <Redundancy location in chassis>
Explanation Specifies the location of the redundant power supply or cooling unit in the chassis, for example:
Redundancy unit: Fan Enclosure
Description Line
Item
SD card device type: <Type of SD card device>
Explanation Specifies the type of SD card device, for example: SD card device type: Hypervisor
Description Line
Item
SD card state: <State of SD card>
Explanation Specifies the state of the SD card, for example: SD card state: Present, Active
Description Line
Item
Sensor location: <Location in chassis>
Introduction 23