Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 10.0.1
71727374757677787980
Table Of Contents
Table 22. Virtual Disk Tasks Supported When System Configuration Lock Down Mode Is On (continued)
Virtual
Disk
Tasks
Name
PERC
H745 P
Front/
Adapter
PERC
H345
Front /
Adapter
HBA355
i
HBA355
e
PERC
H745P
MX
HBA
350i MX
HBA
330
MMZ
PERC
H755N
PERC
H755
MX
PERC
H755
Frnt /
Adapte
r
PERC
S150
Blink Yes Yes No No Yes No No Yes Yes Yes Yes
Unblink Yes Yes No No Yes No No Yes Yes Yes Yes
NOTE: Depending on the RAID level, the Check Consistency task is allowed for different PERC controllers.
Viewing Available Reports
To view a report:
1. Expand the Storage tree object to display the controller objects.
2. Select a controller object.
3. Click Information/Configuration.
4. Select a report from the Select Report drop-down menu.
5. Click Execute.
Available Reports
● Viewing Patrol Read Report
● Viewing Check Consistency Report
● Viewing Slot Occupancy Report
● Viewing Physical Disk Firmware Version Report
Viewing Patrol Read Report
Does my controller support this feature? See Supported Features.
The patrol read report provides information on all the patrol reads performed on the controller in the chronological order. It
provides information such as last run time and result. If a patrol read fails, the reason for the failure is displayed.
To Locate View Patrol Read Report In Storage Management
1. In the Server Administrator window, under the system tree, click Storage.
2. Select View Patrol Read Report from the Select Report drop-down menu.
3. Click Execute.
Viewing Check Consistency Report
Does my controller support this feature? See Supported Features.
The check consistency report provides information on all the consistency checks performed on the controller in a chronological
order. It provides information such as last run time and result. If the consistency check fails, it provides the reason for the
failure.
To Locate View Check Consistency Report In Storage Management
1. In the Server Administrator window, under the system tree, click Storage.
2. Select View Check Consistency Report from the Select Report drop-down menu.
80
Controllers