User's Manual

90 Storage Information and Global Tasks
Storage Components
For information on attached controllers, see the following topics:
• Controller Properties and Tasks
• Controllers
Cluster Mode This property indicates whether the controller is part of a
cluster configuration.
SCSI Initiator ID This property displays the SCSI ID of a SCSI controller.
The default value is 7. You can change the default value in
the BIOS. Controllers in a cluster configuration should not
have duplicate SCSI Initiator IDs. For a list of acceptable
SCSI Initiator ID values, refer to SCSI documentation.
On some controllers, this property is not available. In this
case, this property displays as Not Applicable.
Property Definition