User's Manual

70 PCI Express Solid-State Device Support
Physical Device Tasks
The physical device tasks for PCIe SSD are as follows:
• Blink and Unblink
• Full Initialization
• Prepare to Remove
• Export Log
• Add PCIe SSDs to Fluid Cache Pool
• Remove PCIe SSDs from Fluid Cache Pool
To run a physical device task:
1
Expand the Storage tree object to display the storage component objects.
2 Expand the PCIe SSD SubSystem object.
3 Expand the Connector object.
4 Expand the Enclosure (Backplane) object.
5 Select the Physical Devices object.
6 Select a task from the Available Tasks drop-down menu.
7 Click Execute .
Blink and Unblink
The Blink task allows you to find a device within a system by blinking one of
the LEDs on the device. You can use this task to locate a failed device. If you
need to cancel the Blink task or if the physical device continues to blink
Indefinitely, use the Unblink task.
Capable Speed Displays the highest possible speed at which the device can
transfer data
Fluid Cache Pool
Member
Indicates whether the PCIe SSD is a part of a Fluid Cache
pool or not.
Table 5-3. Physical Device Properties
Properties Description