User's Manual

Virtual Disks 243
Pause Check Consistency
Does my controller support this feature? See Supported Features .
Use the Pause Check Consistency task to pause a check consistency while it
is in progress.
NOTE: The Pause Check Consistency task updates the virtual disk State property to
Resynching Paused immediately. The Progress property may continue to increment
for up to three seconds. This time delay occurs because the polling task may take
up to three seconds to query the task information and update the display.
NOTE: On the CERC SATA1.5/6ch controllers, reconfiguring a concatenated virtual
disk to a RAID 1 may cause the virtual disk to be in Resynching state. Performing a
Pause Check Consistency or a Cancel Check Consistency on a virtual disk while it is
in Resynching state causes the virtual disk to be in a Failed Redundancy state. For
more information, see
Considerations for Concatenated to RAID 1 Reconfiguration on
CERC SATA1.5/6ch Controllers .
Resume Check Consistency
Does my controller support this feature? See Supported Features .
Use the Resume Check Consistency task to resume a check consistency after
it has been paused.
Blink and Unblink (Virtual Disk)
Does my controller support this feature? See Supported Features .
The Blink and Unblink tasks blink or unblink the lights on the physical disks
included in the virtual disk. For more information, see
Blink and Unblink
(Virtual Disk)
.