User's Manual

240 Virtual Disks
• Pause Check Consistency
• Resume Check Consistency
• Blink and Unblink (Virtual Disk)
• Rename
• Split Mirror
• Unmirror
• Cancel Rebuild
• Change Policy
• Replace Member Disk
• Clear Virtual Disk Bad Blocks
• Encrypt Virtual Disk
Reconfigure
Does my controller support this feature? See Supported Features .
Use the Reconfigure task to change the virtual disks properties. For example,
you can use this task to add physical disks or change the RAID level. For more
information, see
Virtual Disk Task: Reconfigure (Step 1 of 3) .
Format, Initialize, Slow and Fast Initialize
Does my controller support this feature? See Supported Features .
Use the Format, Initialize, Slow Initialize, or Fast Initialize task to erase the
files and remove the file systems on a virtual disk. Some controllers require
that you initialize a virtual disk before it can be used. For more information,
see
Format and Initialize; Slow and Fast Initialize .
Cancel Format or Initialize
Does my controller support this feature? See Supported Features .
Use the Cancel Format or Cancel Initialize task to cancel the virtual disk
format or initialize while it is in progress. For more information on virtual disk
format or initialize, see
Format and Initialize; Slow and Fast Initialize .
NOTE: The Cancel Initialize task only applies to the PERC 4/SC, 4/DC, 4e/DC, 4/Di,
4e/Si, and 4e/Di controllers.