User's Manual

204 Physical Disks or Physical Devices
Replacing—A Replace Member Disk task is being performed
on the physical disk or device. For more information, see
Replace Member Disk and Revertible Hot Spare .
NOTE: You can cancel the copying of data at any time during the
execution of this task.
Non-RAID—Non-RAID disks are exposed to the operating
system unlike unconfigured good disks and this enables usage
of disk in direct pass-through mode. Maximum number of
non-RAID disks that can be supported on H310 controller are
64.
You can do the following on this disk:
• Identify as locate option.
• Execute blink or unblink operation.
• Select as a bootable device.
You cannot do the following on the disk:
• Force disk offline or online.
• Select as part of a virtual disk.
• Assign a hot spare.
• Choose as source or target for rebuild, copyback, replace
member, or reconstruct.
• Spun down to save power.
• Select as a bootable device.
Certified This property displays whether or not the physical disk or
device is certified by Dell.
Mirror Set ID This property displays the mirror set ID of the member
physical disk or device that has duplicated data from another
physical disk or device.
Capacity This property displays the full capacity of the disk.
Property Definition