User's Manual

166 Enclosures and Backplanes
Disable Alarm (Enclosure)
Does my enclosure support this feature? See Supported Features .
Use the Disable Alarm task to disable the enclosure alarm. When disabled,
the alarm does not sound when the enclosure exceeds a warning threshold for
temperature or experiences other error conditions such as a failed fan, power
supply, or controller. If the alarm is already sounding, you can turn it off with
this task.
Set Asset Data
Does my enclosure support this feature? See Supported Features .
Use the Set Asset Data task to specify the enclosure’s asset tag and asset
name. For more information, see
Set Asset Data .
Blink
Does my enclosure support this feature? See Supported Features .
Use the Blink task to blink the light-emitting diodes (LEDs) on the
enclosure. You may want to use this task to locate an enclosure. The LEDs on
the enclosure may display different colors and blinking patterns. For more
information on what the blink colors and patterns indicate, refer to the
enclosure hardware documentation.
Set Temperature Probe Value
Does my enclosure support this feature? See Supported Features .
Use the Set Temperature Probe Values task to specify the Warning and
Failure thresholds for the enclosure’s temperature probes. For more
information, see
Set Temperature Probe Values .
View Slot Occupancy Report
Does my controller support this feature? See Supported Features .
The View Occupancy Slot Report task allows you to view empty and occupied
slot details of the selected enclosure. It provides a diagram that represents the
occupancy of physical drive slots. Move the mouse over each slot to view
details, such as physical disk ID, state, and size.