User's Manual

Enclosures and Backplanes 165
Drop-down Menu Enclosure Tasks:
• Enable Alarm (Enclosure)
• Disable Alarm (Enclosure)
• Set Asset Data
•Blink
• Set Temperature Probe Values
Available Reports
To view a report:
1
Expand the Storage tree object to display the controller objects.
2 Expand a controller object.
3 Expand a Connector object.
4 Select the enclosure object.
5 Select the Information/Configuration subtab.
6 Select a report from the Select Report drop-down menu.
7 Click Execute .
Available Reports
• View Slot Occupancy Report
Enable Alarm (Enclosure)
Does my enclosure support this feature? See Supported Features .
Use the Enable Alarm task to enable the enclosure alarm. When enabled, the
audible alarm sounds whenever the fault LED lights. This may occur to signal
events such as:
• The enclosure temperature has exceeded the warning threshold.
• A power supply, fan, or enclosure management module (EMM) has failed.
• The split bus is not installed. (A split bus is indicated by a single triangle
symbol on the back of the enclosure.)