User's Manual

Controllers 151
Convert to Non-RAID Disks
On Dell PERC H310 adapters, in the controller tasks drop-down menu select
the task Convert to Non-RAID disks:
1
The disks in Ready state are displayed. Select the drives that you want to
convert.
2 Click Apply .
An acknowledgement that the disks have been converted is displayed.
Convert to RAID Capable Disks
On Dell PERC H310 adapters, in the controller tasks drop-down menu select
the task Convert to RAID Capable disks:
1
The non-RAID disks are displayed. Select the drives that you want to
convert.
2 Click Apply .
An acknowledgement that the disks have been converted is displayed.
Bus Protocol This property displays the technology that the physical disk is using.
Possible values are SAS and SATA.
Disk Cache
Policy
This property displays whether the disk cache policy of the physical
disks that are part of the CacheCade is Enabled or Disabled.
See
RAID Controller Read, Write, Cache, and Disk Cache Policy .
Table 8-9. CacheCade Properties
Property Definition