User's Manual

120 Controllers
To avoid unlocking foreign configurations and to proceed to
preview/import/clear a foreign configuration that has not been locked, click
Skip or Continue.
If you do not want to import/clear the foreign configurations, or in case of loss
of the associated Passphrase of the corresponding Encryption Key Identifier,
execute the Instant Encrypt Erase task for the physical disks.
CAUTION: Executing the Instant Encrypt Erase task erases all data on the
physical disk.
Some conditions, such as an unsupported RAID level or an incomplete disk
group, can prevent the import or recovery of foreign virtual disks.
Foreign Configuration Properties
The following table describes the properties that are displayed for the Foreign
Disks and Global Hot Spares.
Table 8-4. Foreign Configuration Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
Normal/OK
Warning/Non-critical
Critical/Fatal
For more information, see
Storage Component Severity .
Name This property displays the name of the foreign configuration and is
available as a link. The link enables you to access the physical disks
that constitute the foreign disk.