User's Manual

114 Controllers
To rescan a controller:
1 Expand the tree view to display the controller object.
2 Select the Controller object.
3 Click the Configuration/Information subtab.
4 Select Rescan from the Controller Tasks drop-down menu.
5 Click Execute .
You can also locate this task from the Change Controller Properties drop
down menu. For more information, see
Change Controller Properties .
Create Virtual Disk
Does my controller support this feature? See Supported Features .
Use the Create Virtual Disk task to launch the Create Virtual Disk Express
Wizard. For more information, see
Create Virtual Disk Express Wizard (Step 1
of 2)
.
Enable Alarm (Controller)
Does my controller support this feature? See Supported Features .
Use the Enable Alarm task to enable the controller’s alarm. When enabled,
the alarm sounds in the event of a device failure.
Disable Alarm (Controller)
Does my controller support this feature? See Supported Features .
Use the Disable Alarm task to disable the controller’s alarm. When disabled,
the alarm does not sound in the event of a device failure.
Quiet Alarm (Controller)
Does my controller support this feature? See Supported Features .
Use the Quiet Alarm task to quiet the controller’s alarm when it is sounding.
After it is quieted, the alarm is still enabled in the event of a future device
failure.