User's Manual

110 Controllers
Patrol Read Mode This property displays the Patrol Read mode setting for the
controller. Possible values are:
Auto—When set to Auto, a Patrol Read runs continuously on
the system. When one iteration of the Patrol Read is
complete, the next Patrol Read is scheduled to start within a
period of time specified by the controller. You do not have the
option of manually starting or stopping the Patrol Read in
Auto mode.
Manual—When set to Manual, you can start or stop the
Patrol Read process.
Disabled—This property indicates that the Patrol Read
process is disabled.
For more information about Patrol Read, see
Set Patrol Read
Mode
and Start and Stop Patrol Read .
Patrol Read State This property displays the current state of the Patrol Read
process. Possible values are:
Ready—The Patrol Read process is enabled and runs when
next scheduled or when manually initiated.
Active—The Patrol Read process is currently running.
Stopped—The Patrol Read has been stopped.
For more information about Patrol Read, see
Set Patrol Read
Mode
.
Patrol Read Rate This property represents the percentage of the system
resources dedicated for running the Patrol Read operation. It
changes the amount of system resources assigned for the
Patrol Read task. The patrol read rate can be configured
between 0% and 100%, where:
• 0% — indicates the lowest priority for controllers and has the
least impact on the system performance.
• 100% — indicates the highest priority for controllers and has
a greater impact on the system performance.
Patrol Read
Iterations
This property displays the number of Patrol Read iterations.
For more information about Patrol Read, see
Set Patrol Read
Mode
.
Property Definition