User's Manual

Controllers 107
State This property displays the current status of the controller.
Possible values are:
Ready—The controller is functioning normally.
Degraded—The controller has encountered a failure and is
operating in a degraded state.
Failed—The controller has encountered a failure and is no
longer functioning.
Firmware Version This property displays the version of the firmware that is
currently installed on the controller.
NOTE: On some controllers, Storage Management may not be
able to obtain the firmware version. In this case, Storage
Management displays Not Applicable.
Minimum Required
Firmware Version
This property displays the minimum firmware version that is
required by Storage Management. This property is only
displayed if the controller firmware does not meet the
minimum requirement.
The firmware and drivers listed in the Dell OpenManage
Server Administrator Readme refer to the minimum supported
version for these controllers. Later versions of the firmware
and drivers are also supported. For the most recent driver and
firmware requirements, see support.dell.com.
Driver Version This property displays the version of the driver that is
currently installed on the controller.
NOTE: On some controllers, Storage Management may not be
able to obtain the driver version. In this case, Storage
Management displays Not Applicable.
Minimum Required
Driver Version
This property displays the minimum driver version that is
required by Storage Management. This property is only
displayed if the controller driver does not meet the minimum
requirement.
The firmware and drivers listed in the Dell OpenManage
Server Administrator Readme refer to the minimum supported
version for these controllers. Later versions of the firmware
and drivers are also supported. For the most recent driver and
firmware requirements, see support.dell.com.
Property Definition