User's Manual

Controllers 105
Table 8-2. Component Severity
Controller Information
For information on the controller, see the following topics:
• Controllers
• Controller Properties and Tasks
Controller Components
For information on attached components, see the following topics:
• RAID Controller Batteries
• Firmware/Driver Versions
• Connectors
NOTE: If you have connected the enclosure in Redundant path mode, the
connectors are represented as Logical Connector.
• Virtual Disks
Severity Component Status
Normal/OK. The component is working as expected.
Warning/Non-critical. A probe or other monitoring device
has detected a reading for the component that is above or
below the acceptable level. The component may still be
functioning, but it could fail. The component may also be
functioning in an impaired state. Data loss is possible.
Critical/Failure/Error. The component has either failed or
failure is imminent. The component requires immediate
attention and may need to be replaced. Data loss may have
occurred.