SNMP Reference Guide

796 iDRAC7 MIB
The trap subgroups, and all the traps within each trap subgroup, are described
and listed in sections following the "Trap Variables" section.
NOTE: The traps listed in this document can be correlated to specific events that
are documented in the Dell Event Message Reference guide. There is 1-to-many
relationship between SNMP traps and events in iDRAC7. To correlate a trap to a
specific event or set of events, you can match the Trap ID value of a trap in this
document to the Trap/Event ID value of events in the Dell Event Message Reference
guide.
Trap Variables
This section lists the six variables that are sent with iDRAC7 traps to provide
additional information about a trap or alert generated by some event on the
system. The trap variables presented here apply to all iDRAC7 traps. The trap
variables are sent in the order listed and are reserved for use only in traps.
Alert Message ID
Alert Message
Alert Current Status
Variable Name alertMessageID
Object ID 1.3.6.1.4.1.674.10892.5.3.1.1.0
Description Message ID of the event.
Syntax DisplayString (SIZE (0..8))
Variable Name alertMessage
Object ID 1.3.6.1.4.1.674.10892.5.3.1.2.0
Description Message describing the alert.
Syntax StringType
Variable Name alertCurrentStatus
Object ID 1.3.6.1.4.1.674.10892.5.3.1.3.0
Description Current status of object causing the alert, if applicable.
Syntax ObjectStatusEnum
book.book Page 796 Wednesday, March 6, 2013 12:37 AM