SNMP Reference Guide

Traps 745
Understanding Trap Severity
Traps often contain information about values recorded by probes or sensors.
Probes and sensors monitor critical components for values such as amperage,
voltage, and temperature. When an event occurs on your system, the Server
Administrator sends information about one of the following event types to
the system management console:
• Information/Informational —An event that describes the successful
operation of a unit, such as a power supply turning on or a sensor reading
returning to normal.
Processor sensor
status:
<status>
Specifies the status of the processor sensor, for
example:
Processor sensor status:
Configuration error
Redundancy unit:
<Redundancy location in
chassis>
Specifies the location of the redundant power
supply or cooling unit in the chassis, for
example:
Redundancy unit: Fan Enclosure
SD card device type:
<Type of SD card
device>
Specifies the type of SD card device, for
example:
SD card device type: Hypervisor
SD card state:
<State of SD card>
Specifies the state of the SD card, for example:
SD card state: Present, Failed
Sensor location:
<Location in chassis>
Specifies the location of the sensor in the
specified chassis, for example:
Sensor location: CPU1
Temperature sensor
value (in degrees
Celsius):
<Reading>
Specifies the temperature in degrees Celsius,
for example:
Temperature sensor value (in
degrees Celsius): 30
Voltage sensor value
(in Volts):
<Reading>
Specifies the voltage sensor value in volts, for
example:
Voltage sensor value: 1.693
Description Line Item Explanation
book.book Page 745 Wednesday, March 6, 2013 12:37 AM