SNMP Reference Guide

Storage Management Group 611
FILE LOCATION: C:\Projects -Solutions\SNMP\Mainak\SNMPc24.fm
DELL CONFIDENTIAL – PRELIMINARY 3/6/13 - FOR PROOF ONLY
Description Identifies the current state of the array disk. Possible states:
0: Unknown
1: Ready - Available for use, but no RAID configuration has been
assigned.
2: Failed - Not operational.
3: Online - Operational. RAID configuration has been assigned.
4: Offline - The drive is not available to the RAID controller.
6: Degraded - Refers to a fault-tolerant array/virtual disk that has a
failed disk.
7: Recovering - Refers to a state of recovering from bad blocks on
disks.
11: Removed - Indicates that the array disk has been removed.
13: Non-RAID - Indicates that the array disk is not a RAID capable
disk.
14: Not Ready - Applicable for PCIeSSD devices indicating that
the device is in locked state.
15: Resynching - Indicates one of the following types of disk
operations: Transform Type, Reconfiguration, and Check
Consistency.
22: Replacing - Indicates copyback operation is in progress.
24: Rebuild
25: No Media - CD-ROM or removable disk has no media.
26: Formatting - In the process of formatting.
28: Diagnostics - Diagnostics are running.
34: Predictive Failure
35: Initializing: Applies only to virtual disks on PERC, PERC
2/SC, and PERC 2/DC controllers.
39: Foreign
40: Clear
41: Unsupported
53: Incompatible
56: Read Only - Applicable for PCIeSSD devices. Indicates that
device has reached read-only state.
Name arrayDiskState
book.book Page 611 Wednesday, March 6, 2013 12:37 AM