SNMP Reference Guide

Memory Group 365
15
Memory Group
The Memory Group provides information about the physical memory in your
system. Variables in this group include error correction type, location, and
different types of memory use, such as cache, flash, system, video, and
nonvolatile memory.
Physical Memory Tables
The following management information base (MIB) tables define the objects
in the Memory Group:
• "Physical Memory Array Table" on page 365
• "Physical Memory Array Mapped Table" on page 370
• "Physical Memory Configuration Table" on page 373
• "Physical Memory Logging Table" on page 376
• "Redundant Memory Unit Table" on page 378
• "Physical Memory Card Table" on page 381
Physical Memory Array Table
The physical memory array is the entire physical memory of a system.
The example that follows shows variable values for a system that has one
128-megabyte (MB) dual in-line memory module (DIMM):
• physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or
2gigabytes (GB)
• physicalMemoryArrayTotalNumberSockets = 4 (the example system has
four DIMM slots on the motherboard)
• physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM
installed)
book.book Page 365 Wednesday, March 6, 2013 12:37 AM