SNMP Reference Guide

Remote Flash BIOS Group 227
Table 11-3. Remote Flash BIOS Completion Code
Variable Name:
DellRemoteFlashBIOSCompletionCode
Data Type: Integer
Possible Data Values Meaning of Data Value
completionCodeIsOther(1) The completion code status is
not one of the following:
completionCodeIsUnknown(2) The completion code is unknown
(not known or not monitored).
completionCodeIsOK(3) This completion code completed
successfully.
completionCodeIsBadImage(4) This completion code is a bad
flash BIOS image.
completionCodeIsNoFileAccess(5) Flash BIOS could not be
accessed.
completionCodeIsNotReady(6) Flash BIOS memory not ready.
completionCodeIsDisabled(7) Flash BIOS is currently disabled.
completionCodeIsNoBattery(8) A battery must be installed.
completionCodeIsNoChargedBattery(9) A fully charged battery must be
installed.
completionCodeIsNoExternalPower(10) An external power adapter must
be connected.
completionCodeIsNo12VoltSet(11) 12 volts (V) could not be set.
completionCodeIsNo12VoltRemoval(12) 12 V could not be removed.
completionCodeIsFlashMemoryFailed
(13)
A flash memory failure occurred.
completionCodeIsGeneralFailure(14) A general failure occurred.
completionCodeIsDataMiscompare(15) A data miscompare error
occurred.
completionCodeIsNoImageFound(16) The flash BIOS image could not
be found in memory.
completionCodeIsNoUpdatePerformed
(17)
No update operation has been
performed.
book.book Page 227 Wednesday, March 6, 2013 12:37 AM