Read me

Issue 1: DF416987 E-Clarity: The space between two RAID 10 layout span disk in
the Advance wizard is more
Issue 2: DF419932 E-Clarity: Improper alignment for "Date" text boxes in asset
info page FF3.x
Issue3: DF419976 E-Clarity: An extra line is displayed in the Destinations
Table-Platform Events Page
Issue 4: DF421616 E-Clarity: Page Expired error occurs when the Go Back button
is clicked - Inband failure page
Issue 5: DF421990 E-clarity: |Om6.4|Improper Alignment
Issue6: DF423927: Inconsistency seen between DWS and Legacy Login for
Interface Names in Brazilian OS
Issue 7: DF445065: Restarting web server from Server Administrator GUI gives
fatal JRE error-no functionality loss
Issue 8: DF449421: Server Administrator GUI: Setting power profile fails when
BIOS setup password is enabled
Issue 9: DF451609: Mail-to Setting should be provided allowing user to set the
default mail-address
Issue 10: DF451867: OM6.5.0x136 - ITA omremote.exe does not work against SLES
10 SP4 targets
Issue 11: DF465223: OM6.5, In IE8 with Enhanced Security, adding trusted site
is not fully working
Issues for Server Administrator Web Server running on all Linux Operating
Systems
• Issue 1: DF533809: The "Launch Server Administrator" icon on the X-Windows
desktop launches Server Administrator in the default Web browser. The corresponding
URL uses the default parameters "localhost" and the port number "1311". Any change
in the server IP parameters or a change in the port number for the Server Administrator
renders the icon/link useless. To re-activate the functionality, update the icon file with the
correct URL parameters.
Issues for Server Administrator Running on All Supported Operating Systems
• Issue 1: After installing Server Administrator from the command prompt,
entering an "omreport" or "omconfig" command from the same prompt can cause an
error. Open a new command prompt window and enter commands.
• Issue 2: If the command log page in the Server Administrator GUI displays an
error message indicating that the XML is malformed, you must clear the command
log from the CLI using the "omconfig system cmdlog action=clear" command.
• Issue 3: After a "Reset to Defaults" operation of the Integrated Dell Remote
Access Controller, the first user configuration operation fails if it is a single-user
configuration item (such as enabling or disabling a user or changing user name). Always
change a combination of two-user configuration items (such as enabling or disabling a
user and changing user name) concurrently during your first configuration operation.
• Issue 4: While browsing through IT Assistant, if the SNMP protocol is disabled and the
CIM protocol is enabled, the redundancy status is shown as "lost" even if the system has full
redundancy. To confirm the correct state of the system, use the Server Administrator user-
interface.