Read me

• Issue 15: Hot plug of enclosures takes time to enumerate the enclosure and its
components. During this time, there will be a delay in the response time of tasks,
such as displaying the physical disks on the physical disk page and in the virtual disk
selection page.
• Issue 16: Storage Management does not permit connecting the first enclosure in
single path and attaching the subsequent enclosures in multipath. All enclosures must
be connected in multipath to enable the multipath view.
• Issue 17: An error message may not appear when "Import Foreign Configuration"
task is not successful.
Description: The "Import Foreign Configuration" task can only import virtual
disks that have consistent data. A virtual disk with inconsistent data cannot
be imported. When importing multiple virtual disks in a single operation,
however, the "Import Foreign Configuration" task may report successful
completion even when inconsistent virtual disks are present and have not been
imported successfully.
Solution: If the "Import Foreign Configuration" task is unable to import an
inconsistent virtual disk, then the physical disks that belong to the virtual
disk continue to display a "Foreign" state after the "Import Foreign
Configuration" task completes. In this case, repeat the "Import Foreign
Configuration" task until one of the following occurs:
o There are no longer any physical disks in "Foreign" state after the
"Import Foreign Configuration" task completes.
o You receive an error stating that the "Import Foreign Configuration"
task has not completed successfully. This error indicates that there are no
longer any consistent virtual disks available to be imported. Therefore, all
virtual disks that are not imported are inconsistent and you can either perform
a "Clear Foreign Configuration" to remove the virtual disks or remove the physical
disks from the controller.
• Issue 18: DF60696: Storage Management responds slowly when using Internet
Explorer 7.x, 8.x on a system with mixed SAS and SATA physical disks.
Description: When using the "Create Virtual Disk" wizard from the Storage
Management graphical user interface (GUI), you may notice decreased performance
when using Internet Explorer 7.x, 8.x on a system with multiple Dell
PowerVault(TM) MD1000 storage enclosures that are heavily populated with
mixed SAS and SATA physical disks.
Solution: Use a supported browser other than Internet Explorer 7.x, 8.x or use
the Storage Management command line interface (CLI) to create the virtual disk.
See the Server Administrator readme for information on supported browsers. See
the Storage Management online help or the "Server Administrator Command Line
Interface User's Guide" for information on using the Storage Management CLI.
• Issue 19: DF152362: Storage Management may not display controllers installed