Read me

On certain systems that do not support power monitoring, Server Administrator
reports the two platform event filters related to power monitoring as "System
Power Probe Warning" and "System Power Probe Failure". These two filters are
not supported on these systems. That is, you can view and configure these
filters, but no action is taken.
* Issue 28: DF185770: Primary User Telephone Number does not accept symbols.
On Server Administrator, Under Asset Information->System Information->Primary
User Telephone Number configuration allows only alphanumeric characters.
* Issue 29: The selection of default option for front panel LCD in Server
Administrator displays the Model Name where as the default is Service Tag on
the physical LCD.
* Issue 30: In case Server Administrator does not respond or is locked to your
selections on the component tree, perform the following steps:
1. Click “Preferences”. The Preferences page appears.
2. Click “Server Administrator”. The items on the front page may respond
to your click.
* Issue 31: DF315853: Some Server Administrator CLI commands functions properly
only when run from the elevated console window.
Some Server Administrator CLI commands may function properly only when they
are run from the elevated console window. Therefore, it is recommended that
you use the elevated console for running the CLI.
* Issue 32: Due to some limitations, you cannot login simultaneously to multiple
browser instances/tabs using SSO login, as only one session remains active
while the other sessions expire.
* Issue 33: DF489034: Intel(R) TXT configuration fails due to Virtualization
technology dependency
If the current Virtualization Technology attribute setting is "Disabled"
(Virtualization Technology is part of the Processor Settings group on the BIOS
setup page); the Intel TXT attribute configuration fails on the Server
Administrator user interface (System -> Main System Chassis -> BIOS -> Setup
->System Security.) To resolve this issue, configure Virtualization technology
setting to "Enabled" and reconfigure the Intel (R) TXT attribute, if it is
configurable.
* Issue 34: DF549057: When an operating system is installed through USC, the
BIOS attributes in Server Administrator are displayed as read-only. You can
edit the BIOS attributes after 18 hours of the operating system installation.
Workaround: To enable editing of the Server Administrator BIOS attributes,
launch Lifecycle Controller while booting.