Messages Reference Guide

Introduction 15
Chassis location:
<Name of chassis>
Specifies name of the chassis that generated the
message, for example:
Chassis location: Main System Chassis
Configuration error
type:
<type of
configuration
error>
Specifies the type of configuration error that occurred,
for example:
Configuration error type: Revision
mismatch
Current sensor
value (in Amps):
<Reading>
Specifies the current sensor value in amps, for example:
Current sensor value (in Amps): 7.853
Date and time of
action: <Date and
time>
Specifies the date and time the action was performed,
for example:
Date and time of action: Sat Jun 12
16:20:33 2004
Device location:
<Location in
chassis>
Specifies the location of the device in the specified
chassis, for example:
Device location: Memory Card A
Discrete current
state: <State>
Specifies the state of the current sensor, for example:
Discrete current state: Good
Discrete
temperature state:
<State>
Specifies the state of the temperature sensor,
for example:
Discrete temperature state: Good
Discrete voltage
state: <State>
Specifies the state of the voltage sensor, for example:
Discrete voltage state: Good
Fan sensor value:
<Reading>
Specifies the fan speed in revolutions per minute (RPM)
or On/Off, for example:
Fan sensor value (in RPM): 2600
Fan sensor value: Off
Log type: <Log
type>
Specifies the type of hardware log, for example:
Log type: ESM
Table 1-2. Event Description Reference
(continued)
Description Line Item Explanation