Command Line Interface Guide

92 omconfig: Managing Components Using the Instrumentation Service
Conventions for Parameter Tables
When listing the parameters that a command can take, the parameters are
listed in alphabetical order instead of the order in which they appear in the
command line interface (CLI).
The symbol |, often called pipe, is the logical exclusive or operator. For
example, enable | disable means you can enable or disable the component or
feature, but you cannot simultaneously enable and disable the component or
feature.
omconfig Command Summary
Table 4-2 is a high-level summary of the omconfig command. The columns
titled Command level 2 and Command level 3 list the major arguments that
are used with omconfig. User privilege required refers to the type of privilege you
need to run the command, where U=User, P=Power User, and A=
Administrator. Use is a very general statement about the actions that are
performed using omconfig. More information about the syntax and use of the
omconfig command appear later in this section.
NOTE: Although the table lists all possible omconfig commands, the commands
available on the system depend on the system configuration. If you try to get help or
execute a command for a component not installed on the system, Server
Administrator displays a message that the component or feature is not found on
the system.
NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, omconfig
does not allow to configure the BIOS settings.
Table 4-1. System Availability for the omconfig Command
Command Level 1 Command Level 2 Applicable to
omconfig servermodule Blade systems
mainsystem Blade systems
system Rack and Tower systems
chassis Rack and Tower systems