Command Line Interface Guide

80 omreport: Viewing System Status Using the Instrumentation Service
omreport system platformevents or omreport servermodule
platformevents
Use the omreport system platformevents or omreport servermodule
platformevents command to view how the system responds for each listed
platform event.
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
omreport system recovery or omreport servermodule recovery
Use the omreport system recovery or omreport servermodule recovery
command to see whether there is an action configured for a hung operating
system. Also view the number of seconds that must elapse before an operating
system is considered hung.
omreport system shutdown or omreport servermodule shutdown
Use the omreport system shutdown or omreport servermodule shutdown
command to view any pending shutdown actions for the system. If properties
for shutdown are configured, executing this command displays these
properties.
NOTE: Due to the limitations of certain operating systems (for example, VMware
ESXi), certain features are not available with this release of OpenManage Server
Administrator.
omreport system summary or omreport servermodule summary
Use the omreport system summary or omreport servermodule summary
command to view a comprehensive summary of software and hardware
components currently installed on the system.
Ty p e :
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC
is installed, Server Administrator displays the USC version.