Command Line Interface Guide

78 omreport: Viewing System Status Using the Instrumentation Service
Ty p e :
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport
servermodule pedestinations command lists each of the valid parameters.
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
NOTE: The actual number of destinations you can configure on the system may
differ. Table 3-8 lists the available settings.
Table 3-8. Settings for the omreport system pedestinations or omreport servermodule
pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the first
destination.
Example:
101.102.103.104: IPv4 address of the
first destination.
Destination Number:
Destination 2
destination 2: Displays the second
destination.
Example:
110.120.130.140: IPv4 address of the
second destination.
Destination Number:
Destination 3
destination 3: Displays the third
destination.
Example:
201:202:203:204: IPv4 address of the
third destination.