Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 67
omreport chassis pwrsupplies or omreport mainsystem pwrsupplies
Use the omreport chassis pwrsupplies or omreport mainsystem pwrsupplies
command to view properties of the system’s power supplies. Type:
omreport chassis pwrsupplies
or
omreport mainsystem pwrsupplies
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
For each power supply profile in the system, values display for the following
fields:
• Status
•Location
•Type
• Rated Input Wattage (in Watts)
• Maximum Output Wattage
•Online Status
• Power Monitoring Capable
omreport chassis remoteaccess or omreport mainsystem remoteaccess
Use the omreport chassis remoteaccess or omreport mainsystem
remoteaccess command to view general information on baseboard
management controller or integrated Dell remote access controller
(BMC/iDRAC) and
remote access controller if DRAC is installed.
Ty p e :
omreport chassis remoteaccess
or
omreport mainsystem remoteaccess
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.