Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 63
The following is an example output:
NOTE: Power budget requires license to report the details. If the appropriate
license is not installed or has expired, the system does not display the power budget
details. For more information, see
The Dell Licensing Management Guide at
dell.com/support/manuals.
omreport chassis pwrmonitoring or omreport mainsystem
pwrmonitoring
Use the omreport chassis pwrmonitoring or omreport mainsystem
pwrmonitoring command to view the properties of the system’s power
consumption. The values display either in Watts or BTU/Hr based on the
configuration. Type:
omreport chassis pwrmonitoring
or
omreport mainsystem pwrmonitoring
For each power monitoring profile in the system, values display for the
following fields:
• Power Consumption Status
•Probe Name
•Reading
• Warning Threshold
Power Inventory and Budget
Power Inventory
System Idle Power
System Maximum Potential Power
:
:
0 W
0 W
Power Budget
Attribute
Values
Attribute
Values
:
:
:
:
Enable Power Cap
Enabled
Power Cap
400 W (56%)