Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 55
omreport chassis memory or omreport mainsystem memory
Use the omreport chassis memory or omreport mainsystem memory to view
details for each memory module slot in the system. If the system supports
redundant memory, this command also displays the status, state, and type of
memory redundancy implemented on the system. Type:
omreport chassis memory index=n
or
omreport mainsystem index=n
The index parameter is optional. If you do not specify the index, Server
Administrator displays information for all memory modules on the system.
If you specify the index, Server Administrator displays a summary for a
specific memory module.
NOTE: To maintain consistency across the commands, the output format of this
command has changed. Change the user scripts as applicable.
Output for an occupied memory slot may resemble the following:
An unoccupied memory slot still has a connector name. Output for an
unoccupied memory slot may resemble the following:
Index
Status
Connector Name
Type
Size
: 1
: Ok
: DIMM_A1
: DDR3 - Synchronous Unregistered
<Unbuffered>
: 2048 MB
Index
Status
Connector Name
Type
Size
:
: Unknown
: DIMM_A2
: [Not Occupied]
: