Command Line Interface Guide

omreport: Viewing System Status Using the Instrumentation Service 35
leds U, P, A Displays the properties
you have set for
light-emitting diodes to
flash under various alert
conditions.
memory U, P, A Displays properties of
the system's memory
arrays.
nics U, P, A Displays the NIC and
Team interface
properties.
ports U, P, A Displays the properties
for the system’s parallel
and serial ports, such as
I/O address, IRQ level,
connector type, and
maximum speed.
processors U, P, A Displays properties of
the system’s processors,
including speed,
manufacturer, and
processor family.
pwrmanagement U, P, A Displays power
inventory details such
as system idle power,
system maximum
potential power, and
power budget
information.
pwrmonitoring U, P, A Displays properties of
power consumption.
pwrsupplies U, P, A Displays the properties
of power supplies.
Table 3-2. Command Level 1, Level 2, and Level 3 for omreport
(continued)
Command
Level 1
Command Level 2 Command
Level 3
User
Privilege
Required
Use